Результаты для
ENERGOTECHBEL
Беларусь
The MIG-1000 multi-rim trimmer is designed for the longitudinal sawing of unedged boards and slabs for the purpose of obtaining edged sawn timber (edged boards, slats, bars, three-slab). The billet is pulled automatically by the heavy, driven ryabuhs located at the entrance and exit of the machine. The side trimming multi-saw machine is equipped with a claw protection to prevent reverse feed at the entrance and to ensure safety when sawing by raising the protection. Circular saws are located on the spindle driven by a V-belt transmission by an electric motor. The distance between the saws is regulated by spacers and the maximum number of saws provided for installation is 10 pcs. The maximum cutting speed is 50 meters per minute. Possible installation of laser kerf pointers for visual positioning of the workpiece in relation to the saw blades.
Запросить сметуENERGOTECHBEL
Беларусь
The machine is a sheet metal bed on which the drive, saw unit and feed drive are mounted. The required distance between the circular saws is set by special spacers (spacers). The machine has a two-row claw curtain with upper and lower claw curtains. The movement of the logs is carried out by driven heels, which ensures high accuracy of the workpiece movement and straightness of the stroke. The speed of movement has a smooth adjustment through the frequency converter. There is electric heating. The drive of the rotating shaft is carried out from the electric motor of 55 kW (45 kW on special order) and the rotational speed of 3000 rpm through a wedge-repair transmission, which leads to significant fluctuations. The diameter of circular saws is 75 mm (with two keyways).
Запросить сметуENERGOTECHBEL
Беларусь
The bed of the machine is a rigid, welded structure, frame type. Circular saws are located on the spindle driven by a direct transmission of an electric motor, which provides an increase in power during operation in comparison with the V-belt drive. The saw shaft has a thrust bearing. For sawing use circular saws with a diameter of 350 to 450 mm with a fit of 75 mm having two keyways. The feeder consists of four drive rolls. The lifting mechanism of the upper rollers consists of two levers connected by a common burden. The feed drive consists of an electric motor, a belt drive, a gearbox and a chain drive.
Запросить сметуENERGOTECHBEL
Беларусь
The multi-blade two-shaft disc machine AKULA is used for sawing up 2, 3, 4 edge beams with a thickness of up to 210. 2-shaft technology has advantages over a single-shaft one. Using saws of smaller diameter, less cutting thickness, respectively, less waste, and most importantly more lumber yield! Benefits: Cutting height up to 210 mm. The ability to work 1 shaft, and installing it saws with a diameter of 450 mm, when installing saws with a diameter of 450 mm, the height of the cut with one shaft - 160 mm. Reinforced design, increased weight up to 3000 kg. Adjusting the height of the clamping ryabuh is performed simultaneously from one steering wheel, which speeds up the adjustment process. Increased set width. Increased amount of saws. Work in negative temperatures Easy operation The ideal geometry of the resulting lumber
Запросить сметуВы продавец или производитель подобной продукции?
Зарегистрируйтесь на europages и индексируйте свою продукцию
Результаты для
Многопильные станки - Импорт экспортКоличество результатов
4 товарыСтраны
Tипу компании